Polymaticast 8 – 3d printing

This episode we talk about 3d printing, some basic discussion about the different types and benefits of some 3d printing materials and printers.

Our article on printing on glass covered in kapton tape http://polymatic.link/1z

John |Expanse season 1 recap with cats http://polymatic.link/1s
Alan | Fiddler – http://polymatic.link/1v
John | Unbox therapy has a existential moment http://polymatic.link/1t
Alan | JS Tips – http://polymatic.link/1u
John | Casey Neistat: What you don’t see http://polymatic.link/25
Alan | Recording Time Calculator – http://polymatic.link/1w
John | Elite dangerous: ALIENS! http://polymatic.link/21
Alan | SUMS UP MOTHERHOOD IN 34 SECONDS – http://polymatic.link/1x
John | Deadmau5 doing designing tracks http://polymatic.link/22
Alan | Greenhouse House – http://polymatic.link/1y
John | Scroll lock http://polymatic.link/23
John | Trello being aquired http://polymatic.link/24

Twitter: Alan http://twitter.com/chaess
Twitter: John http://twitter.com/webdevvie
For feedback: podcast@polymatic.media
Twitter polymatic: http://twitter.com/thepolymatic
Website http://polymatic.media

Kapton on glass: The ideal printbed with easy swapping?

Note: This article is about modifying the flashforge creator pro, This can be applied to a host of other 3d printers with similar constructions. 

If you use a buildtak-like surface or something similar like the one that comes with the printer, sometimes 3d prints stick too well to the print bed surface and you gouge out part of the printbed cover trying to remove it. And then have to stick another €10 or more bed surface to the printbed with all the removal problems to get rid of the glue first.

Continue reading Kapton on glass: The ideal printbed with easy swapping?